Save yourself money
Save yourself money. Before you call out an engineer, try these things….. 1. No central heating … could be the room thermostat is not turned up sufficiently? As the weather changes in the autumn,
Our new team at Taskforce Heating and Plumbing
Taskforce is growing so we have some new team members to welcome. Our aim is to grow slowly and recruit extremely carefully so that we can maintain and increase our high standards of workmanship
A prompt response to boiler breakdown
This morning we were called to a house in Emsworth, near Havant, where the heating had stopped working due to a boiler breakdown. We sent an engineer (Matthew) within the hour. His first job was
Shower not working
There is nothing more annoying that getting into the shower and finding that it is cold! Well …. perhaps getting in and finding that it goes cold after a while is even worse! If it’s
Heating always on when the water is on…
Are your radiators heating up when your system is switched to hot water only? This is a common problem which not only leaves you very hot, but is a waste of our (now very expensive!)
Gas Boilers – To change – or not to change
We are often asked to give a view on whether it is time to change an older gas boiler and whether a new gas boiler will be a more energy-efficient way to produce heat. There
Gas cooker not working?
Are there problems with your gas cooker or Gas hob? Here are some tips on what to do: The most common problem is the ignition failing on a hob. This sounds as if it may
Gas fire not working
Gas fires tend to be very reliable and rarely go wrong. The most common faults (in order) that we solve are: A blocked aeration port on the pilot assembly As with all gas appliances, the
Fault code on the boiler
If you are having trouble with the heating or hot water, there may be a fault code on the boiler. These usually appear when the boiler has completely stopped working. Always take a careful note
Heating on all the time
If your heating is staying on when you don’t want it, or running all the time, there are several initial checks you can do to try to sort out the problem: Look at the programmer.